Hardware Reference Manual in PDF Other Motor Controller and Driver Products JMC Series ADANTE Series ICAD Series FIGARO Series ALLEGRA Series GLORIA Series ADAGIO Series SONATA Series PRESTO Series SMDS Series Related Products Motorized Linear Actuators Motorized XY Stages Motorized Linear Lift Stages Motorized Rotary Stages Combined Linear-Rotary Stages Motorized Goniometer Stages

Features Compact Multi-axis Stand-alone Plug-and-Play Built-in Self Test Three Speed Ranges, Fast, Medium, and Slow Mode, more info... Proportional Speed Control, more info... Positive and Negative Limit Switches per Axis Zero Adjustment of Joystick on Power-up Pre-wired Motors, Joystick and Trackball Available to Drive Stepper, DC Servo, Brushless, and Voice Coil Motors   Optional Limit Switches per Axis Optional External STEP and DIRECTION Signals per Axis Optional Gyroscope Stabilization Totally Integrated Solution Evaluation Unit Is Available upon Request

Stepper Motor Driver Up to 7 Amp Phase Current +12 VDC to +80 VDC Power Supply 2 to 256 Micro-steps per Step Resolution Size 8 to 42 Motors Auto Current Reduction DC and Three Phase Brushless Motor Driver Up to 40 Amps Phase Current +18 VDC to +80 VDC Power Supply

This motion control system is capable of moving a group of motors via controlling the movement of a joystick or trackball. The speed of the motor is proportional to the tilt angle of the joystick or the rotational speed of the trackball. 

This series is complete multi-axis, multi-speed, stand-alone, easy-to-use, plug-and-play, and low cost for manual stepper motor control applications . They can replace or upgrade manual systems, motorizing them with precision joystick and/or trackball control.

Each system includes the power supplies, controller, the micro-stepper and/or servo motor drivers.

Controlling devices include analog joystick,  trackball, two-phase quadrature signals,  digital potentiometer, DC voltage, and external step and direction signals.

NO PROGRAMMING IS NECESSARY.

This series is also available without the drivers. The outputs from the system would be power, enable, step and direction signals. This configuration is suited to interface with the "integrated motor and drivers".